Silicone rubber heating plate is mainly composed of nickel-chromium alloy etching heating plate and silicon rubber high temperature insulating cloth. It heats up quickly, has uniform temperature, high thermal efficiency, good toughness, pressure resistance, abrasion resistance, and it is convenient to use, safe, waterproof, and aging. The life span is more than three years.
Adapt to the environment
1. The heating, mixing and heat preservation of industrial equipment pipes, tanks, towers, tanks in humid and non-explosive gas occasions can be directly wound on the surface of the heated part when in use;
2. Freezing protection and auxiliary heating of air-conditioning compressors, motors, submersible pumps and other equipment;
3. Medical equipment such as blood analyzers, test tube heaters, medical and health care shapers, body shaping and slimming belts to compensate for heat, etc.
Technical Parameters
1) Higher temperature resistance of insulating materials: 250℃
2) Higher operating temperature: 200℃
3) Insulation resistance: ≥100 MΩ
4) Compressive strength: 1500v/1min
5) Power deviation: ±5%
6) Withstand voltage: >2500v.
Note: The products are all customized products, there is no spot, the general production cycle is 5-10 working days for delivery
1. The heating plate can be processed in a variety of shapes, round, triangular, guided, etc. You can also design according to your needs.
The heating plate is uniformly distributed on the silicon rubber insulating layer by alloy resistance wires, and the shape can be freely determined and cannot be cut after the production is completed. Size requirements: length (mm) * width (mm), the default thickness is 1.6mm, high power or special needs can be thickened according to customer needs.
2. Operating voltage: 380V, 220V, 110V, 36V. . . Generally, high pressure is used for large size, low pressure is used for small size, and can be customized according to customer needs.
3. Power: Designed according to customer requirements.
4. Installation options: can open screw holes, double-sided tape, spring buckle, or glue in our factory.
5. Temperature control:
1. Knob-type temperature switch, the commonly used temperature range is 0-120 degrees, 30-150 degrees, 50-200 degrees, the temperature can be adjusted, and the heating plate can be installed at any position, or two wires can be connected to the side. The temperature control accuracy is average. Suitable for industries such as heat preservation and antifreeze that are not very precise in temperature control
2. Built-in constant temperature temperature switch, generally 5 degrees is an interval, you can choose the constant temperature arbitrarily, such as 30 degrees, 35 degrees, 40 degrees, and 45 degrees. . . The temperature is not adjustable, and the heating plate can be installed at any position. It cannot be externally mounted. The temperature control accuracy is average. It is suitable for use in industries such as heat preservation and antifreeze that have low temperature control accuracy.
3. Digital display temperature control, larger temperature control range -20+200 degrees, intelligent digital display, can keep a certain temperature, can also keep a certain temperature range, temperature can be adjusted, can be installed at any position of the heating plate, can also be cited The two wires are connected externally, and the control accuracy is high, which is suitable for industries that require high temperature control accuracy.
Choose the appropriate temperature control according to your actual situation, or you don't need to control the temperature.
High quality custom 220-380v industrial flexible silicone rubber heater Silicone Rubber Heaters