All Products
Polyimide Film heater (Kapton heater) is available in a variety of shapes, sizes, and wattages, it is a clear amber colored polyimide film. The process for making flexible heating film is similar to that of Etched Foil Silicone heaters. It is a high-temperature flexible heating element with excellent dielectric properties capable of operating environments between -185 degree celsius to 180 degree Celsius. This is very thin, the thickness is about 0.2mm, it is very light, so it is widely used on 3D printer. Pressure-sensitive adhesive (PSA) backing surface is standard, but special adhesives or mounting holes can be customized as customer requirement.
Polyimide film PI electric heating film is made of polyimide film as the outer insulator and nickel-chromium alloy etching heating sheet as the inner conductive heating body, which is formed by high temperature and high pressure heat bonding. The polyimide electric heating film has excellent insulation strength, excellent electrical strength, excellent heat conduction efficiency, and excellent resistance stability, so it is widely used in the field of electric heating.
Features:
◆Good softness, flexibility, fast preheating speed and long service life.
◆Ultra-thin: The thickness is only 0.2mm, and it is flat. It occupies a small space, and the bending radius is about 0.08mm.
◆Various varieties: various resistive circuit elements with small surface area can be made.
◆Uniform heating: The resistive circuit is evenly arranged, the thermal inertia is small, it is in close contact with the heated body, and the heating speed is fast. It has extremely low saturated vapor pressure with insulating materials and low outgassing.
◆Easy to install: with double-sided tape, it can be directly pasted on the surface of the heated body.
◆Long safe life: flat design, low power load compared with other heating wire heaters, and long service life. Good insulation.
◆ High temperature and high pressure test: It can be used for a long time at 200℃. And passed the 2500V high voltage test.
Performance parameter
◆Insulation and thermal conductivity layer: polyimide film
◆Heating core: nickel-chromium alloy etching heating piece
◆Thickness: about 0.3mm
◆Working temperature: -60-200℃
◆External voltage: customer demand
◆Power: designed according to the product use environment
◆Power deviation: <±5%
◆Lead tensile strength: >5N
◆Adhesive strength of adhesive: >40N/100mm
Application range:
1. Scientific analysis instruments, such as: provide a constant temperature source for the thermal conductivity (or thermal insulation coefficient) tester, medical instruments, etc., to stabilize the operating temperature of the optoelectronic components.
2. In a deep cold environment, make the instrument and equipment reach a safe working temperature. For example: instruments and facilities such as artificial satellites, space vehicles and airplanes, as well as instruments used in high latitude areas, and instruments such as card readers, liquid crystal displays, LCDs and other instruments.
3. Vacuum heating and baking field.
4. Heating of automobile oil pan, rear-view mirror defrosting sheet, snow removal and defrosting heating element of antenna or radar.
5. Medical care and beauty equipment industry.
