All Products
| Using temperature range | -20 degree to 200 degree |
| resistance | more than 5 MOhm |
| Compressive strength | 1500v/5s |
| Power | ± 8% deviation |
| The highest voltage | 380 KV |
| Size | Max:1000mm×8000mm Min:20mm×20mm |
| thickness | 1.5mm(0.8mm to 5mm will be OK) |
| length of wire |
standard 200mm |
Immediately consult the details of product development, the use of technology to benefit the community car battery heating chip Kapton Power Battery Heating Film polyimide Pi Electric Heating Film is a polyimide film as an external insulator, the NI-CR alloy etch heating plate is used as the inner conductive heating body, which is combined by high temperature and high pressure. POLYIMIDE has excellent insulation strength, excellent electrical resistance strength, excellent heat transfer efficiency, excellent resistance stability, which is widely used in the field of electric heating. Features: Good Flexibility, bendability, quick preheating speed and long service life. Ultrathin: only 0.2 mm thick, faceted. The bending radius is about 0.08 mm. Variety: can be made of a variety of extremely small area of resistive circuit components. UNIFORM HEATING: the Resistance Circuit is evenly distributed, small thermal inertia, close contact with the heated body, rapid temperature rise. It has very low saturated vapor pressure with insulating material and low outgassing. Convenient installation: With double-sided adhesive, it can be pasted directly on the surface of the heated body. LONG SAFE LIFE: Graphic design, low power load and long service life compared with other heating wires. Good insulation. High temperature and high pressure test: it can be used at 200 °C for a long time. And passed the 2500V high voltage test. Performance parameter insulation heat conduction layer: polyimide film heating core: NI-CR Alloy etching heating plate thickness: about 0.3 mm working temperature:-60-200 °C applied voltage: Customer Demand Power: design power deviation according to product use environment: < ± 5% lead tensile strength: > 5n adhesive strength: > 40N/100MM APPLICATION SCOPE: 1. Scientific analysis instruments, such as: Thermal Conductivity (or thermal insulation Coefficient) for the determination of constant temperature source, medical equipment, and so on, to stabilize the temperature of optoelectronic components. 2. In the deep cold environment, the instrument and equipment to achieve safe working temperature. Examples include instruments such as satellites, spacecraft and aircraft, as well as cryogenic protection for instruments and instruments used in high latitudes, such as card readers and liquid crystal display. 3. Vacuum heating and baking. 4. Heating Oil Pan of automobile, defrosting plate of rearview mirror, defrosting and defrosting heating element of antenna or radar. 5. Health care and beauty equipment industry.
